The surface of the bag is a whole Chinese painting. A piece of the Taihu Lake Lake stone is pressed on the light yellow one, and a dry lotus is on the right, and the bottom half is empty. Painting is printed layer by layer on a four-color machine, with a transition in the depth of ink and wash. Paper is a thick ox pickup truck, the paper itself is dull, the light does not reflect when turned on, and the bag can stand upright. The woven tape passed through the hole punched in the bag body, and a black rivet pressed against the edge of the hole, causing the lifting force to fall on the rivet. Send a box of tea to elders during festivals, which is packaged in this bag and can hold a card at the opening. Store name logo、 Seals and patterns are priced according to your size and craftsmanship.
A Chinese Painting on the Bag Face, Half of It Left Blank
The bag face is one whole Chinese painting, the top part is a pale yellow, a piece of Taihu rock sits in the middle, a dried lotus on the right, and the lower half is left empty. The painting is printed on a four colour press, the depth of the ink is built up layer by layer, it is not one flat colour. The paper is thick kraft card, the bag stands up and the mouth does not sag when it is held. The paper itself is matte, light on it does not bounce back, and the dark part looks deep, not bright. The signature and the seal are pressed at the lower right, a small one, and that red dot is the only colour on the bag. The handle is an off white webbing, the same tone as the yellow of the paper, and joined on it does not jump out.
The Rivets Lock the Webbing onto the Bag
The two ends of the webbing go in through holes punched in the bag body, a black metal rivet sits over the hole edge, and the rivet locks the webbing and the bag body together. The rivet is pressed dead, when the bag is pulled the force lands on the two rivets, not on the glued layer. Lift it and look, the two handles are straight and the bag mouth does not squeeze in towards the middle. Pull the webbing a few times and it does not turn in the hole, the holes are punched on the centre line of the bag body.
One Bag Matches a Whole Tea Gift Set
- A small can tea gift box: six cans go in one box, the bag takes it standing, and a length of the mouth is left over.
- A chenpi gift box: it is a flat square box, it goes in flat and lifts without tilting.
- A single black tea or green tea box: one box to one bag, and the mouth is folded over.
- A tea shop: a customer buys two boxes, and one bag carries them out.
- A business visit: a box and a card go in the bag, and it is carried in by the handle.
Shop Name, Logo and Seal Can All Be Changed
- Shop name: one line printed at the lower part of the bag face, the characters set in your typeface.
- Logo: printed in the middle of the bag face, or pressed near the bag mouth.
- Seal: the red square at the lower right, it can be changed to your own seal.
- Painting: the picture can be changed, landscape, flowers and birds, objects can all be printed, or only one block is kept.
- Bag: the size is set to your box, and the paper can be changed to white card or kraft.
The Same Press Prints the Boxes and the Bags
The Chinese painting on the bag face is printed on the four colour press, several bag faces are laid on one large sheet, and after printing it is cut, creased and folded. The holes are punched on another machine, the hole position is set by the width of the webbing, and the hole edge has to be clean, a rough edge rubs the webbing. The rivet is pneumatic, the rivet goes through the hole and is pressed dead in one stroke, and the webbing is caught in between. The bag bottom is glued, the folded edge is creased first and then glued, and after gluing it is pressed for a while before it is let go, so the bottom is flat. The presses in the factory print boxes and bags both, and one colour can be matched between the box and the bag. On bags the factory has made paper bags, handled bags, gift bags and wine bags, and on boxes it has made mailer boxes, handled boxes, drawer boxes, book style boxes, lid and base boxes, folding cartons, jewelry boxes and flip top gift boxes, and hot stamping, logo printing, embossing and UV are all done in the factory.