A cupcake is looked at before it is eaten, so the box has to show it. The lid carries one window, one piece of clear film fixed on the inside, with the edge of the film pressed under the paper so nothing peels at the corner. The box is cut from one sheet, the lid, the body and the base stay joined, and the corners lock on tabs, so no glue and no tape are used anywhere. A card tray sits inside with one hole per cup, and each hole is cut to the width of the cup, so nothing slides about when the box is carried. The paper is food grade, in white card or in kraft, and the inside is left uncoated and unprinted, so a cake goes straight in. The lid can take a logo on the outside, one colour or full colour, and white ink also prints on kraft.
The Window Is One Piece of Clear Film Inside
A window is cut in the lid, and one piece of clear film covers it from the inside. The opening is die cut with rounded corners, the film is a little larger than the hole, and its edge is pressed under the paper. The film lies flat against the inside of the lid, so the lid closes level with the mouth of the box. Looking down through the window, the cups and the fruit on top are in view without the lid coming off. There is no gap between film and paper, and icing that touches the film wipes off with a finger. The window is cut to fit the box, small on a one cup box and a long strip across a twelve cup box.
The Box Folds Up Without a Drop of Glue
The box is cut from one sheet, and the lid, the body and the base stay joined. The four sides go up on the pressed lines, the corners are locked with tabs, and no glue or tape is used. Once it is up the box is square, and the lid closes with its front tab pushed into the slot.
The Tray Holds Each Cup in Its Own Hole
- The tray is one piece of card with a hole for every cup, and one cup sits in one hole.
- The rim of each hole is toothed, so a cup is held at its waist and does not turn inside the box.
- The tray sits below the mouth, and the height of the tray follows the height of the cup, so a tall cup takes a taller box.
- The tray rests in the body without being glued, and it lifts out when a different cup is used.
- A box can also go out without a tray, for tarts or for snowy mooncakes that sit low.
Five Places These Boxes Leave the Shop
- From a dessert shop: six go in one box, and the window shows which six were picked.
- From a bakery: boxes are filled in the morning and go into the cold case, and the window shows how many are left.
- For a birthday: twelve go into the large box, and the lid stays closed on the table with the cakes still in view.
- For afternoon tea delivery: two go into the small box, which fits into a carrier bag.
- As a favour: the kraft box with one label on the lid, so it does not look like it was handed over bare.
Food Grade Paper in White Card or Kraft
The paper is food grade, in white card or in kraft, and one batch is one colour. The paper has no smell of its own, and the inside is left uncoated and unprinted, so a cake goes straight in. A logo can be printed on the outside of the lid, one colour or full colour, and white ink also prints on kraft.
The Factory Glues the Window Into the Lid
The box is made in the factory: the sheet is cut, the window is die cut, the creases are pressed, the film is glued in and the box is folded flat, all on one line. The film is set by machine and it is larger than the opening, so the glue goes on that outer ring and sits against the paper rather than against the cake. The creases have to go through, since a crease that is too light furs the card when it folds and one that is too deep breaks it, so the first box of every batch is folded and its corners looked at. The holes in the tray are cut on a die, and a hole a little too small will not take a cup while one a little too large lets it move, so the holes are cut to the cup width you send. White card and kraft are run apart, since the two papers are not the same thickness and the crease is set for each. Besides this cake box, the factory has made handled boxes, drawer boxes, book style boxes, lidded boxes, mailer boxes, folding boxes, tea boxes and jewellery boxes, and for bags it has made paper bags, tote bags, gift bags, clothing shop bags, wine bags and takeout bags, with foil stamping, logo printing, embossing and UV all done in the same plant. When the same box is ordered again, the die and the film size are kept, and the size and the layout follow the last batch.