There is no rope on this bag: the handle is a slot cut straight through the panel that rises above the mouth. It goes out of a fashion store with a folded shirt, stands in a boutique with a scarf, and is handed to a guest at a brand event as a gift bag. The card is thick and matte, the front panel is printed in one solid colour, and the logo on it can be foiled or given spot UV. Tell us the size and the quantity, and the price comes back.
The Handle Is Cut From One Piece, the Shape Is Simple and Neat
The bag has no rope, no eyelet and no knot: the front panel runs higher than the mouth, and the handle is a long slot with rounded ends cut straight through that panel. Because the handle and the bag are one sheet, there is nothing to come loose, and the bag hangs from a shape rather than from a cord. The slot is cut with a little clearance for a hand, and the panel around it is wide enough that the card does not bend when the bag is carried full. Print sits below the slot and above the fold, so the mark is seen at eye level when the bag hangs from a hand. On the sample the panel is one solid colour on a white bag, and no other line is printed on the front.
The Body Is Stiff and Does Not Go Soft, Light to Carry
The card is thick, so the bag stands on a shelf with nothing in it and the wall stays flat between the side folds. With a shirt inside, the body does not pull inward at the mouth. It is light in the hand, since the weight is card and print and there is no rope hardware.
Finishes on the Surface, Printing, Foil and Spot UV
The face is matte, so a full bleed print reads as a soft colour instead of a shine. A logo is printed, foil stamped, or given spot UV over the print, and the UV catches a lamp while the matte ground stays dull. A dark panel on a pale bag needs one extra pass to keep the edge of the colour clean.
Several Sizes for Different Packing Needs
- A shirt or a blouse: the upright bag, the panel just over the collar.
- A T shirt: the same bag, a shorter body.
- A scarf or a small bag: the narrow upright size.
- Cosmetics: the small size, one box to a bag.
- A gift set: the wide size, with a side gusset.
- A shop counter: the mid size, stacked flat behind the till.
The Hole, the Bag Shape and the Pattern Can Be Designed to Your Brand
- The hole: a long slot, a square hole, a round hole, or one cut on the slant.
- The height of the hole: it can sit high for a light bag or lower for a heavy one.
- The bag shape: upright, landscape, or with a side gusset.
- The panel: a patch colour, a full bleed print, or the paper left bare.
- The size: cut to your product, one die to one size.
- The run: a small batch is taken, so a test order can go out first.
Cutting, Printing and Gluing All Happen Here
The bag is made here: white card cut, printed, laminated matte, the handle die cut, the folds pressed and the bag glued, all in this factory. The handle die is made here too, so a new hole shape does not wait on an outside plant. Paper bags, carrier bags, gift bags and wine bags have all been made here; on the box side there are handled boxes, drawer boxes, book style boxes, lid and base boxes, mailer boxes, folding boxes and jewellery boxes; and logo printing, foil stamping, texture pressing and window patching are done here too. The handle die is checked on the first sheet, since a slot cut a millimetre low shows as a thin strip of card at the top. The cutting die, the handle die and the print file of the first run stay on file, so a repeat order runs the same as the first, and the second batch matches the first.