The box is folded from one sheet of white card, there is one tuck flap at each end, and it closes once the flap is pushed into the slot. The card is white on one face and white on the other, so colour prints true on it and a pale tint is not pulled down by the board underneath. The boxes are sent flat, one stack on another, and in use the four corners are opened out and the folds are followed along the creases to come out square. There are many sizes, and the same box only needs a new die rather than a new structure, so a row on the shelf lines up level. Tell me the size, what you want printed and how many, and I will send you the price.
White Card Material, Clean and White
The box is made from white card that is white on one face and white on the other, the surface is flat, and a hand run over it meets no grain. The white face is the printing face, so colour goes on true and a pale tint is not pulled down by the board underneath. Once folded, the corners sit down and the four walls stand straight. The inside is white as well, so cosmetics and small fittings go in without a liner pasted in first. A plain white box can go out as it is, and once it is printed the ground underneath is still white. The edges are cut on the die, so the cut is clean and no fibre lifts at the corner.
Tuck End Structure, the Flaps Stay Closed
There is one tuck flap at each end, and a notch is cut at each side of the flap. When the flap is folded down the notches catch on the folded edge of the wall, and the flap holds itself, with no tape and no glue. To open, a thumb lifts the flap and it comes up, and to close it goes back into the same notch.
Several Sizes to Choose From
- Small: one lipstick or one eyeshadow pan, one to a box.
- Medium: earphones, a cable and a charging head, packed together.
- Long and narrow: one serum bottle or one small perfume, stood upright.
- Flat and wide: a pen, a comb, a set of brushes.
- Large: a sample set or a few small gifts, for a festival box.
- A whole row: the same box in different sizes on a shelf, the rims level.
Folds Up Neat, the Walls Stand Straight
The fold lines are pressed on the die and the crease is a bright line, so folding along it brings the four corners together. The boxes are sent flat, stacked in bundles, and they take little room in the stockroom. Opened out, the four walls are straight and the rim is one line, so a row stands at the same height.
Sizes and Printing Made to Order
- Size: length, width and height are set to your goods, and the structure does not change.
- Printing: one face in full colour, or the whole box printed all over.
- Surface: gold foil, spot UV or matte film, one of them or several.
- Inside: a card insert can be added so that what is in it does not move.
- Quantity: small runs are taken, and several sizes can be ordered together.
- Artwork: the print file is laid out on the flat blank, with the cut lines in the same file.
The Steps the Factory Runs for a Tuck End Box
This box runs on the carton line in our plant, and sheet cutting, printing, film, die cutting, creasing and notching are finished on one line. Creasing and die cutting sit on the same die, and a crease half a millimetre out of place leaves the four corners out of line once the box is folded. The two notches on the tuck flap are cut in the same die step, and the cut is rounded, so the flap goes in without catching. On boxes the factory has made tuck end boxes, mailer boxes, handled boxes, drawer boxes, book style boxes, lid and base boxes, folding cartons, jewelry boxes and flip top gift boxes, and on bags it has made paper bags, handled bags, gift bags, wine bags and clothing bags. On a white card printed in a pale colour the ground tends to go grey, so the ink is run lighter and the sheet goes through once more. The boxes are packed flat, a sheet of paper between one bundle and the next, so the corners do not rub black on the way.