The box is printed pink on the outside, the inside of the lid has a picture printed on it too, lift the lid and the picture is seen first, then the goods. Both sides come off the same sheet, so the pink outside and the white inside are matched together, and a customer opening it does not feel two different boxes. The whole box is one sheet folded up, no glue is used, it is opened out by hand when packing and it ships flat, so many sheets go into one carton. The slots in the insert are cut to your bottle, and the bottle set in a slot does not slide about. Tell me the size, the colour outside and the picture inside, and I will send you the price.
Double Side Colour Printing, a Surprise When the Box Opens
The outside of the box is printed in pink, the inside of the lid is printed as well, and that side is a full picture: two bottles of foundation, one blush, and a line of text across the top. The outside and the inside are the same sheet, the front is printed first, the sheet is turned over and the back printed, and only after both sides are printed does it go to die cutting and creasing. The pink outside and the white inside are matched together, so on lifting the lid it does not read as two different boxes. When the lid is closed the picture faces in, and when the lid is lifted the picture shows first. A customer who has opened this far has not touched the goods yet, and the first thing seen is this picture. One layer further in is the bottle and the box itself.
Mailer Box in One Piece, Folds Up Fast
The whole box is one sheet, it comes die cut and creased, and no glue and no staple are used. The four sides are stood up, the four corners are folded in and locked, the lid is brought over from the back, and the tab at its front end is pushed into the slot in the front wall to close. It is sent flat, many sheets go into one carton, and it takes one push of the hand to open it out when packing.
Corrugated Paper Light and Tough, the Wall Springs Back
The wall is two layers of paper with one corrugated layer in between, and that middle layer stands on edge, it is not flat. A finger pressed on the side goes in a little, and on release it springs back and is flat again. This layer holds the two sheets apart and leaves a gap between them. When a box of bottles is bounced about in a van, the bottle base meets this gap first, not the hard board directly. The paper itself is not heavy, and a stack of it is light in the hand.
One Box That Travels to Different Places
- In a beauty livestream: one foundation and one blush go in one box, and the picture inside the lid works as the backdrop.
- At a cosmetics counter: a whole sample set goes in one box, and it is handed over like a gift box.
- For a festival gift: a ribbon goes in the box, and a name is written on it.
- For e commerce shipping: the box is the shipping box, an insert goes in, and it is sent as it is.
- At a trade fair stand: the same box with the picture inside the lid changed becomes another brand's.
Custom Sizes, Colours, Artwork Inside and Outside, and Logo
- Size: length, width and height are set to your goods, and the slots in the insert are changed with them.
- Colour: one colour outside, one colour inside, chosen separately for the two sides.
- Artwork: the outside can be printed all over, the inside printed with a picture or with text.
- Logo: printed in the middle of the lid inside, or printed on the front wall.
- Film: a matte film can be added outside, so the hand does not catch a shine on it.
The Steps the Factory Runs for a Mailer Box
The sheet is cut off the roll, the outside is printed first, the sheet is turned over and the inside printed, and only after both sides have gone through the press does it go to die cutting. Die cutting and creasing are on the same die, and which face the crease is pressed into only shows when the box is folded, since a crease pressed on the wrong face makes the box lean. The insert is cut on another die, the slots are drawn round your bottle, and a slot is cut a little smaller than the bottle so that what is set in it does not move. On boxes the factory has made mailer boxes, handled boxes, drawer boxes, book style boxes, lid and base boxes, folding cartons, jewelry boxes and flip top gift boxes, and on bags it has made paper bags, handled bags, gift bags and wine bags. On a box printed on both sides the inner face marks easily, so a coat of varnish is run behind the press and the hand slides over it. This box needs no gluing, one sheet folds up into it, and what is saved is the glue and one whole step.