Open it and the lid stands up like a book cover, while the inside of the base stays white. A skincare duo goes in one, two supplement bottles go in another, and two tea tins go in a third, one to a compartment. The board is thick, the outside is wrapped in fine linen texture paper in nine solid colours, and two magnets hidden in the front edge hold the lid down. Tell us the size, the colour and what goes inside, and we will match the insert and send the price.
Magnetic Flip Lid, the Box Opens Like a Gift
The lid is joined to the base along the back, so it swings up like the cover of a book and stands there on its own while you take things out. Two magnets sit hidden in the front edge, one in the lid and one in the base, and the lid is pulled down into place instead of being pressed. There is no ribbon, no tuck flap, no lid to lift off, so the first thing a customer does is open a cover. The magnet lets go all at once and does not cling to the last centimetre. Closed, the lid sits level with the base and the seam is one straight line, so the box reads as a solid block on a shelf.
Thick Rigid Board, Holds Its Shape Under Pressure
The walls are thick rigid board, wrapped on the outside, so each wall stands straight and the four corners come out at right angles. Pressed on the lid with a flat hand, the panel does not bow in the middle. On a table the box does not rock, and a few stacked up do not lean.
Many Colours With Specialty Paper Texture, Neat Outside
The outside is wrapped in specialty paper with a fine linen weave, so the surface has a grain and a slight sheen that catches light at an angle rather than a flat printed colour, and it runs in nine solid colours: gold, coffee, red, light blue, green, pink, white, yellow and navy. Inside, the base is lined in white paper, so the goods sit on white and the contrast with the coloured outside is clean. Because the paper is wrapped over the edge and round the corner rather than printed on one face, the colour carries from the lid to the side without a break.
Size and Insert Can Both Be Customised
- The size: length, width and depth given to us, and the box is cut to the inside measure.
- The insert: paper, EVA, flock and many other kinds besides; contact us for the one you need.
- The compartments: one cell for one bottle, or one cell for a whole set.
- The card: a leaflet or a card tucked beside the insert.
- The magnets: two at the front edge, hidden inside the board.
One Box Shape Fits Many Kinds of Products
- Skincare: one toner and one cream, two cells.
- Supplements: two bottles, a flock layer under them.
- Tea: two tins, standing upright.
- A favour: one small gift to a box, given at a festival.
- A business gift: the company name on the lid, one card inside.
- Stationery: one pen and one notebook, in the long size.
This Box Is Made in Our Factory
The box is made here: board cut, specialty paper mounted, the magnet seats pressed, the magnets set in, the edges turned and the box glued, all in this factory. The die is made here too, so a change of a few millimetres does not wait on an outside plant. Paper bags, carrier bags, gift bags and wine bags have all been made here; on the box side there are handled boxes, drawer boxes, book style boxes, lid and base boxes, mailer boxes, folding boxes and jewellery boxes; and logo printing, foil stamping, texture pressing and window patching are done here too. The corners are turned by hand, and the paper on the edge has to come from the same roll as the lid, or the colour reads different in daylight. The cutting die, the wrap paper and the magnet positions of the first run stay on file, so a repeat order runs the same as the first, and the second batch matches the first.