The bag is narrow enough that one bottle stands up inside it and stays there. It leaves a winery with a single bottle, waits on a hotel counter, and goes home with a wedding guest. The paper is thick kraft printed in three colours and laminated, the zigzag band runs to the mouth, the name is stamped in gold, and the cotton rope is threaded through the turned edge. Send the bottle height and diameter, and the price comes back.
The Narrow Tall Shape Is Made for One Bottle
The mouth is cut narrow, one finger wider than the body of a Bordeaux bottle, so the bottle stands on its own inside and no paper has to be packed around it. The bag runs about the height of the bottle, and the shoulder sits a little below the mouth, so from the outside you cannot tell which way the bottle is leaning. The body is flat, pressed between two hands it is one sheet, so it does not bulge when carried. The bottle rests on a base board, one whole sheet of board, so the foot does not push through the paper. The mouth is turned over into a short hem, the hem holds the body, and the rope passes out through two holes under that hem. Put the bottle in, close the bag, hand it over: three steps, and no extra wrap.
Colour Printing, Good Looking and Good Value
The print covers the top part as one field: a zigzag band in grey, gold and beige, running straight up to the mouth. The body is laminated, so a finger slides over it without catching, and a splash of water wipes off. The gold line across the middle is stamped, pressed onto the lower edge of the band, so the band and the letters sit on two different levels.
Thick Paper, Stiff and Hard Wearing, Holds the Weight
The paper is thick kraft: an empty bag stands on the table without falling, and with a bottle in it the body does not pull inward. The handle passes under the hem through two layers of paper, both ends caught on the inside, so the load sits on the paper and not on one hole. Scraped against a table corner, the sheet takes a scuff but does not tear through.
All Kinds of Customisation Are Supported
- The logo: gold foil, printing, or a blind deboss.
- The wine name: printed on the front, the spacing set to the length of the name.
- The pattern: the zigzag band is replaced with the winery's own motif.
- The lamination: gloss or matte.
- The rope: matched to the pattern, cotton or paper twist.
- The quantity: priced by design, one price for one design.
Made to the Height and Diameter of Your Bottle
- A Bordeaux bottle: straight shoulder, so the width is the shoulder width plus a little.
- A Burgundy bottle: sloping shoulder, so the mouth is cut narrower than the shoulder.
- A champagne bottle: a fatter body, and the bag is widened to follow it.
- A square spirits bottle: the base is changed to a square bottom.
- A hotel or a club: one logo stamped, the front left empty.
- A wedding favour: two bags side by side, the rope in the wedding colour.
Bags Like These Are Made in Our Factory
The bag is made here: kraft cut, printed, laminated, foil stamped, holes punched, rope threaded and the bag glued, all in this factory. The plate for the zigzag and the foil plate are made here too, so changing one colour does not wait on an outside plant. Paper bags, carrier bags, gift bags and wine bags have all been made here; on the box side there are handled boxes, drawer boxes, book style boxes, lid and base boxes, mailer boxes, folding boxes and jewellery boxes; and logo printing, foil stamping, texture pressing and window patching are done here too. Sizes are cut to your bottle, and the bag can be packed flat or opened up.