The paper and the handle on this bag are the same black, so the only thing that catches the light is what you put on it. It is made for clothing shops, wine and tea shops, jewellery counters and hotel boutiques, where the bag stands on the shelf next to the goods. The card is dyed black right through, so a cut or folded edge stays black, and silver foil, UV or emboss sits on top as metal, gloss or shadow. Send a logo and the finish you want, and the ribbon width, size and foil colour are quoted from it.
Black Ribbon Into Black Paper, No Edge Shows
The handle is a black satin ribbon, gloss on the face and dull on the back, and it goes through two narrow slots in the top edge. Both ends are turned into the bag and laid flat, so the front shows two straps going down into the paper and no knot at all. The bag is black and the strap is black, but the ribbon carries more light than the card, so the handle lifts off the face when a lamp is on it. The ribbon is wide, so it rests on the palm as one band instead of a cord, and two heavy coats in the bag do not cut into the hand. Because the ends are turned in flat rather than knotted, the inside of the mouth stays level and nothing bulges behind the front panel. Changing the ribbon colour is a change of ribbon only, and the print stays on its plate.
On Black, Three Finishes Read Differently
- Silver foil: the foil is pressed onto the black and is the only mark on the bag that can be brighter than the paper under it.
- UV: a clear gloss is printed on the black, so the mark is a shine with a slight raise that shows when the light turns.
- Emboss: no colour goes on, the card is pressed down, and the mark reads in the shadow of its own edge.
- The three can be mixed in one run, a foil logo with an embossed line beside it, made in the same pass.
This Card Is Black All the Way Through
The card is dyed black through its whole thickness, not coated with black on the surface. A cut edge, a crease and the turned-in strip at the mouth therefore stay black, and no pale core shows along them. Turn the mouth inside out and the paper is still black.
Where the Bag Can Be Used
- At a clothing shop: a folded coat goes in, and the black bag does not fight the black coat.
- At a wine and tea shop: two bottles stand side by side, and the bag waits by the counter without leaning on a wall.
- For a business gift: one box of tea goes in, the logo in silver, and nothing else is needed to hand it over.
- At a hotel: a guest packs a few things at check out, and the wide ribbon does not slip in the hand.
- At a jewellery counter: a small bag holds one box, and the ribbon shines more than the card under the lamp.
Full, the Bag Still Stands on Its Own Base
The body is thick black card, and the paper has enough body to stand without a lining behind it. The front is one panel, one strip is folded in on each side, and the base is a single panel folded in with the four corners turned and pressed flat, so the bottom is level. The edges are made by creasing, pressed straight, so a side folds as a line and not as a rounded corner. Empty on a table, the bag stays upright, and with two coats inside the base does not bow out. Lifted by the ribbon, the mouth keeps its opening instead of folding in at the two sides. Put it down for a photo and it holds itself up without a hand behind it.
The Factory Cuts and Glues the Black
The bag is made in the factory, black card cut, creased, folded, glued, slotted and threaded on one line, with foil, UV and emboss done in the same plant. Bags and boxes come out of the same works, paper bags, gift bags, wine bags and takeout bags, and handled boxes, drawer boxes, book style boxes, lidded boxes, mailer boxes, folding boxes, tea boxes, jewellery boxes and cake boxes, with foil stamping, logo printing, screen printing, embossing, texture pressing, UV and black foil all done there. A change of card, size, ribbon colour or finish is quoted from your logo or your sample bag.