For a business dinner, a winery shelf or a wedding table, this box opens on a full sheet of gold. The outside is matte laminated black, so a lamp in the room does not turn the box into a glare, and the inside is lined in gold paper laid in one piece, which means a bottle is lit from below instead of sitting in a dark well. The lid is joined at the back and lifts from the front with no lock, and it stays back while both hands are free to take the bottle out. A gold metal plate is fixed on the front edge with the letters pressed flat, and the name on it can be the winery's or the company's instead of ours. One structure gives a single bottle box and a two bottle box, and the two differ in width only, so the lid, the lining and the plate are made the same on both. Laid flat the box is a slab, and a case of them stacks square. Send a drawing or a bottle and the width, the lining colour and the plate are quoted from it.
The Outside Is Black and the Inside Is Gold
The black sits on the paper face under a matte film, so light across it does not come back and the hand meets a dry surface. The inside is lined in gold paper, and once the lid is back the whole opening reads as gold, with the light spreading over it instead of hitting one bright point. Black and gold are the only two colours, and there is no third one printed on the face. The gold paper is laid over the walls and the base in one piece, so a corner is a fold in the paper and not a join. Closed, only black is visible, and the gold stays inside until the lid comes up. The body is thickened grey board wrapped in black paper and creased, and it stands on its own base.
The Lid Lifts From the Front and Stays Back
- The lid is joined at the back and there is no catch at the front, so it lifts straight up from the front edge.
- Halfway up, the gold lining shows before the inside of the box does.
- All the way back, the lid rests behind the box and does not fall forward again.
- Closing it, the front edge drops first and the weight of the lid presses it flat.
A Metal Plate Sits on the Front Edge
A gold metal plate is fixed in the middle of the front edge, with rounded corners and one line of letters pressed flat into it. Above it, on the lid, there is a small mark foiled in gold, set a little high of centre and smaller than the plate. The plate is a metal piece fixed on, not printed, so its thickness can be felt under a finger.
One Bottle or Two From the Same Structure
The box comes in two widths, a narrow one for a single bottle and a wide one for two, and both are built the same way. In the single one the bottle lies on its side, with the neck to one end. In the two bottle one the bottles lie side by side with a gap between them, so neither touches the other. The depth follows the diameter of the bottle, and the width follows the number of bottles, so send the bottle and the two are set from it. Aside from the width, the lid, the lining and the plate are made the same on both.
Five Places a Wine Box Still Has to Go
- For a business dinner: two bottles side by side, and the lid opens onto a sheet of gold.
- For a company gift: a run of boxes with the company name on the plate.
- For a winery: the box stands next to its bottle on the shelf, with only the small mark on the lid.
- For a client thank you: the narrow one, easy for one person to carry.
- For a wedding: one bottle to a table, box and bottle going out together.
The Factory Wraps Black and Lines Gold
The box is made in the factory: grey board is cut, wrapped in black paper, laminated matte, creased, lined in gold paper and fitted with the plate, all on one line. Bags and boxes come out of the same plant, paper bags, gift bags, wine bags and takeout bags, and handled boxes, drawer boxes, book style boxes, lidded boxes, mailer boxes, folding boxes, tea boxes, jewellery boxes and cake boxes, with foil stamping, logo printing, screen printing, embossing, texture pressing, UV and black foil done there too. A change of width, lining colour, plate or foil is quoted from your drawing or your sample box.