Magnetic Foldable Box, Multi-color Gift Packaging Box
Magnetic Foldable Box, Multi-color Gift Packaging Box
Magnetic Foldable Box, Multi-color Gift Packaging Box
Magnetic Foldable Box, Multi-color Gift Packaging Box
Magnetic Foldable Box, Multi-color Gift Packaging Box
Magnetic Foldable Box, Multi-color Gift Packaging Box

Magnetic Foldable Box, Multi-color Gift Packaging Box

Two magnets do the work of a lid and a ribbon, so this box closes with a sound. The body and the lid are cut from one sheet of board, and folding along the pressed lines gives a box, with no glue and no tape anywhere. The side wall is a second layer folded in from that same sheet, which means the box stands hard and the lid sits square once it is closed. A slot is cut in the lid, the satin ribbon goes through it and is held inside, so the front shows a knot that was tied rather than a bow glued on. Red, pink, white and black are all in the range, each colour has its bag in three sizes, and a set leaves as one colour. The face is laminated, foil and print both go on, and a change of colour or layout does not need a new box.

One Piece of Board Folds Into a Closed Box

The box is cut from one piece of board, and the lid and the body stay joined along one edge. The four sides stand up on the pressed lines, the lid comes over, and two magnets pull it shut. The magnets are set inside the board, so nothing shows on the face, and the lid only counts as closed when it goes down with a soft click. Opening takes a little lift, so the lid does not slide open on its own in a bag. No glue and no tape are used, since the box is held by the folds and the magnets. When it is closed, the gap between lid and body runs the same width all the way round, which is how a box that stands true shows it. The box is shipped flat, one sheet on another, and stands up into a box when it is needed.


The Side Wall Is Two Layers of the Same Sheet

- The wall is two layers, an outer layer and an inner layer, and the inner one is folded in from the same sheet.
- The inner layer is pressed down to the base, so no glued edge shows inside the box.
- The base is folded rather than glued, and the four corners lock against each other.
- With a double wall the sides stay straight, so a bottle of perfume or a candle does not push the box out of shape.
- The inner layer is the same colour as the outside, so the box is one colour with the lid open.


The Bow Goes Through a Slot in the Lid

The bow is tied through a long slot in the lid, not stuck on top of it. Both ends of the satin ribbon go down through the slot and are held inside the lid, so the front shows only the knot and two tails. The knot is tied by hand, each one sits at the same point on the lid, and the ribbon takes the colour of the box.


Five Gifts That Leave the House in This Box

- For a birthday: a bottle of perfume goes in over paper shavings, and the lid is tied shut with the ribbon.
- For Valentine's Day: a scarf is folded in, and the red box needs no wrapping paper around it.
- For New Year: two tins of tea go in, and the box and its bag are the same colour to carry out.
- For a wedding favour: one goes on each chair, pink and white set out side by side.
- For a brand gift: a batch is foiled with one mark, then packed by colour.


Four Colours and Three Sizes With Bags

Red, pink, white and black are all in the range now, and each colour has its bag in the same colour. The box comes in three sizes, small, medium and large, and the bags are cut to match the three, so a set is one colour from box to bag. The face is laminated, foil stamping and logo printing both go on it, and a change of colour or layout keeps the same box.


The Factory Sets the Magnets and Ties the Bow

The box is made in the factory: grey board is cut, the wrap is glued on, the creases are pressed, the shape is die cut, the magnets are set and the ribbon is threaded, all on one line. The creases are pressed with a steel rule, and one crease out of line leaves the box standing crooked, so the first box of every batch is folded and its four corners looked at. The magnets go between two layers of board, and a magnet a millimetre off leaves a slanted gap when the lid closes. The slot for the ribbon is die cut, since a slot too wide lets the knot shift and a slot too narrow will not take the ribbon. The face is laminated before it is die cut, so the cut edge does not burst. Besides this folding box, the factory has made handled boxes, drawer boxes, book style boxes, lidded boxes, mailer boxes, folding boxes, tea boxes and jewellery boxes, and for bags it has made paper bags, tote bags, gift bags, clothing shop bags, wine bags and takeout bags, with foil stamping, logo printing, embossing, grain embossing and UV all done in the same plant. A change of colour or size is quoted from your box or your drawing, and the paper and the film are quoted together.



blue mailer box

Request Pricing & Samples

Start Your Packaging Project Today


Hot-selling products

Explore our most popular packaging and printing products, trusted by customers worldwide for their quality, durability, and outstanding presentation.

Our Latest Blog

Stay informed with the latest packaging innovations, printing technologies, and news from MOYEE Packaging.

Premium Custom Party Bags for High End Event Packaging
Premium Custom Party Bags for High End Event Packaging
Specialized packaging for celebratory events serves as more than just a container; it is an extension of the events theme and a tangible memory for guests. When businesses seek custom party bags, they are looking for a balance between aesthetic appeal, structural durability, and brand alignment. This guide explores the technical and artistic considerations involved in creating premium paper carriers that elevate the guest experience. In the competitive B2B packaging landscape, the difference between a generic carrier and a high-end gift tote lies in the details of executionfrom the tactile feel of the ink to the precision of the fold.
Read More
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print: A Practical Fit Check
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print: A Practical Fit Check
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print fits presentation-led packaging for couture, boutique, jewelry, and salon settings. Its tactile embossed paper, coordinated ribbon handle, low-saturation color, and gold or silver stamping support a controlled brand presentation. Choose it by measuring the product inside first, then settle the grain, color, handle, logo placement, and stamping treatment.
Read More
Premium Custom Business Bags for High End Brand Packaging
Premium Custom Business Bags for High End Brand Packaging
For B2B enterprises, the physical presentation of a product often serves as the first tangible touchpoint of brand quality. Investing in custom business bags allows companies to extend their brand identity beyond the digital screen, providing a professional vessel for corporate gifts, teaware, or luxury promotional items. This article explores the technical and aesthetic considerations required to move from generic packaging to a high-conversion brand asset. The challenge for most procurement managers is balancing structural durability with high-end visual appeal. Whether it is a heavy tea set or delicate cultural crafts, the packaging must resist slumping and handle weight without tearing.
Read More

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.