Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant
Vintage Kraft Jewelry Box for Earring Bracelet Pendant

Vintage Kraft Jewelry Box for Earring Bracelet Pendant

An earring dropped into a box with nothing inside rattles about, so this box is lined with a velvet foam tray and a slot is cut for each piece. The pile of the foam sits between the metal and the board, so a ring rests on the soft face and not on paper. The lid is a full cover and it goes over the base on four sides, so the two edges meet in one line when it is closed. The body is hardboard wrapped in coated paper, which gives the wall a body and keeps the box square on a shelf. Eleven sizes are kept, from a ring box that sits in the palm to a long box for a chain laid out flat. Kraft and matte black are the two colours, and the face is left blank, so your logo goes on with nothing behind it. A ribbon round the box is enough to hand it over, and the box needs no bag. A jewelry shop, a gift counter and an anniversary order all work with it. The size, the colour and the logo are set to your order, and a piece that does not fit a size starts a new one. Our factory cuts the tray, glues the box and prints the face, and each lid is tried on its base before it is packed.

The Body Is Hardboard With Coated Paper

The body is hardboard with a coated paper glued over it, and the coated paper is what you see. The board has a body to it, and the box does not give when it is held. Four walls stand at a right angle, and the box does not lean when it is put down. The lid is a full cover, and it goes over the top on all four sides. The edge of the lid meets the edge of the base in one line, and the joint is not stepped. Inside, the paper is turned down and glued, so no board edge shows. The corner is a fold and not a cut, and the paper runs round it. Two boxes stacked, the lid of the lower one takes the base above it, and neither tips.


Each Slot Holds One Piece

The tray is a black velvet foam sheet, and it sits in the base of the box. A ring gets a round slot with a cut across it, and the band sits in the cut. A pair of studs gets two small holes, and the posts go through. A necklace gets one long slot, and the chain lies along it. A bracelet gets a shallow bed, and the curve rests on it. The foam is cut on a die for the size, so every slot sits where the piece sits.


From a Ring Box to a Long Necklace Box

- A ring box: the size of a palm, and a ring or a pair of studs goes in.
- A square box: earrings, a brooch or a pair of cufflinks.
- A long box: a bracelet or a bangle.
- A slim box: a chain laid out flat.
- A deeper box: a pendant on a card.


Kraft and Black With a Blank Face

Two colours are kept, kraft, which is the colour of the paper itself, and a matte black. The kraft box shows the fibre of the paper, and a print on it sits into the sheet. The black box is coated, and the face is flat with no sheen. Both are left blank on the face, so nothing sits behind your logo. A logo can go on the lid in one colour, or be pressed into the paper. A ribbon round the box is enough to hand it over, and the box needs no bag. The two colours are the same box, and only the paper changes. A shop can take both, kraft for one line and black for another.


Shops and Gifts Use It Every Day

- In a jewelry shop: a ring goes in, and the box goes into a bag at the counter.
- For an anniversary: a pair of earrings and a card go in.
- At a pop up: boxes are lined up in a tray, one size of each.
- For a wedding favour: a small pendant goes to each guest.
- For an online order: the box goes into a mailer and out.
- For a brand: the box is printed with the logo and stacked in the window.


The Tray Is Cut to Size in Our Factory

Our factory glues the board, wraps the paper and cuts the tray in one place. The tray is cut on a die made for the size, and the slots are cut to the piece. A ring slot and a chain slot can be cut on the same die when a box takes both. The foam is glued into the base before the lid is fitted. Each lid is put on its base, and a lid that sits high is taken out. A logo is printed or pressed on the blank face, and the print is checked against your file. A new size starts with a new die, and the tray follows the same drawing.



blue mailer box

Request Pricing & Samples

Start Your Packaging Project Today


Hot-selling products

Explore our most popular packaging and printing products, trusted by customers worldwide for their quality, durability, and outstanding presentation.

Our Latest Blog

Stay informed with the latest packaging innovations, printing technologies, and news from MOYEE Packaging.

Premium Custom Party Bags for High End Event Packaging
Premium Custom Party Bags for High End Event Packaging
Specialized packaging for celebratory events serves as more than just a container; it is an extension of the events theme and a tangible memory for guests. When businesses seek custom party bags, they are looking for a balance between aesthetic appeal, structural durability, and brand alignment. This guide explores the technical and artistic considerations involved in creating premium paper carriers that elevate the guest experience. In the competitive B2B packaging landscape, the difference between a generic carrier and a high-end gift tote lies in the details of executionfrom the tactile feel of the ink to the precision of the fold.
Read More
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print: A Practical Fit Check
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print: A Practical Fit Check
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print fits presentation-led packaging for couture, boutique, jewelry, and salon settings. Its tactile embossed paper, coordinated ribbon handle, low-saturation color, and gold or silver stamping support a controlled brand presentation. Choose it by measuring the product inside first, then settle the grain, color, handle, logo placement, and stamping treatment.
Read More
Premium Custom Business Bags for High End Brand Packaging
Premium Custom Business Bags for High End Brand Packaging
For B2B enterprises, the physical presentation of a product often serves as the first tangible touchpoint of brand quality. Investing in custom business bags allows companies to extend their brand identity beyond the digital screen, providing a professional vessel for corporate gifts, teaware, or luxury promotional items. This article explores the technical and aesthetic considerations required to move from generic packaging to a high-conversion brand asset. The challenge for most procurement managers is balancing structural durability with high-end visual appeal. Whether it is a heavy tea set or delicate cultural crafts, the packaging must resist slumping and handle weight without tearing.
Read More

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.