Heavy Duty Colored Mailer Box for Lingerie Clothing Shipping
Heavy Duty Colored Mailer Box for Lingerie Clothing Shipping
Heavy Duty Colored Mailer Box for Lingerie Clothing Shipping
Heavy Duty Colored Mailer Box for Lingerie Clothing Shipping

Heavy Duty Colored Mailer Box for Lingerie Clothing Shipping

A board of three layers with a row of E flute standing on edge is what keeps this box light in the hand and firm on the shelf. It arrives flat, so a stack of them takes a corner of your back room instead of a whole shelf of built boxes. When the order goes out, you stand the sides up, press the two tongues into the slots, and the lid closes flat, with no glue and no tape. That is the part your staff like, because a box is folded in a few seconds while the parcel is already on the counter. Then the colour, thirteen matte shades are kept ready, so a small run can go out in your own colour instead of a plain brown box. Your name prints on the outside and on the inside of the lid too, which means it is read twice, once on the shelf and once when the box is opened. Inside there is room to spare, for a folded shirt, a bra or a jar of cream. A lingerie shop, a clothing store or a gift stand packs its goods this way, and the filled boxes stack without sliding. Our factory cuts the die, prints the sheet and keeps the thirteen colours under one roof, so a change of size or colour comes back to one person. Tell us the size, the colour and what goes on the box, and one box is folded and checked before the rest are run.

Three Layers With a Row of Flute Inside 

The board is three layers, and the middle layer is a row of E flute standing on edge. The face is a coloured sheet, and the colour is in the sheet, not a paint laid on after. The board is about 1.5 mm thick, so the wall has a body when the box is held. The flute runs one way across the sheet, and each crease is pressed across the flute, so the fold is a straight line. The inside of the box is the same colour as the outside, and the flute shows only at the cut edge. At the cut edge a line of flute is seen, and that line runs even along the side. The wall is a sandwich, and the flute between the two faces keeps the two faces apart. Where two walls meet, one wall is turned in and glued behind the other, so the corner is not a fold but two layers.


No Glue and the Box Folds Up in a Few Seconds 

- Flat: the box comes as a flat sheet, and a stack of them takes a corner of a shelf.
- Sides: two sides are stood up, and the short tongues are turned in.
- Slots: the two long tongues go down into the slot cut in the base, and the tongue locks in.
- Lid: the lid is folded over, and its front edge goes down over the box.
- No glue: nothing is glued at the setup, and the box is folded by hand in a few seconds.


Thirteen Colours and Every One Is Matte 

Thirteen colours are kept, and every one of them is matte. The list runs red, rose, pink, purple, blue, navy, sky, mint, green, yellow, black, white and kraft. A matte face does not throw the light back, and under a lamp the box reads as one flat colour. The face is smooth, and a finger run over it finds no grain and no dust. A colour can be matched to your sample, and the thirteen are the ones kept ready. Two colours in one order can be packed together, one bundle of each.


The Outside and the Inside Can Carry Your Information

- Outside: a name, a logo or one line of text on the lid and on the four sides.
- Inside: the same print can go on the inside of the lid, so the box is read again when it is opened.


Lingerie Clothing and Small Items All Fit

- Lingerie: a bra and a pair of briefs, folded in tissue.
- Clothing: a folded shirt, a scarf or a pair of socks.
- Accessories: a belt, a pair of gloves or a small bag.
- Beauty: a jar, a bottle and a card.
- Gift: a mug, a candle or a box of chocolate.
- A shop move: the goods are packed box by box, and the boxes stack.


We Keep the Thirteen Colours Ourselves in House

Our factory keeps the thirteen colours on the floor, so a small order does not wait on a paper run. The die is cut in house, and the same die is used for every colour of the same size. Print is done before the die cut, and the sheet goes from the press to the cutter without leaving the building. A box is folded once before the run, and the tongue is pushed into the slot to see that it locks. A colour that is asked for often is kept deeper, and a colour that is asked for rarely is kept in a smaller stack. Orders for lingerie and clothing shops mostly take three or four colours in one lot. A new size starts with a new die, and the artwork is laid on that die.



blue mailer box

Request Pricing & Samples

Start Your Packaging Project Today


Hot-selling products

Explore our most popular packaging and printing products, trusted by customers worldwide for their quality, durability, and outstanding presentation.

Our Latest Blog

Stay informed with the latest packaging innovations, printing technologies, and news from MOYEE Packaging.

Premium Custom Party Bags for High End Event Packaging
Premium Custom Party Bags for High End Event Packaging
Specialized packaging for celebratory events serves as more than just a container; it is an extension of the events theme and a tangible memory for guests. When businesses seek custom party bags, they are looking for a balance between aesthetic appeal, structural durability, and brand alignment. This guide explores the technical and artistic considerations involved in creating premium paper carriers that elevate the guest experience. In the competitive B2B packaging landscape, the difference between a generic carrier and a high-end gift tote lies in the details of executionfrom the tactile feel of the ink to the precision of the fold.
Read More
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print: A Practical Fit Check
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print: A Practical Fit Check
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print fits presentation-led packaging for couture, boutique, jewelry, and salon settings. Its tactile embossed paper, coordinated ribbon handle, low-saturation color, and gold or silver stamping support a controlled brand presentation. Choose it by measuring the product inside first, then settle the grain, color, handle, logo placement, and stamping treatment.
Read More
Premium Custom Business Bags for High End Brand Packaging
Premium Custom Business Bags for High End Brand Packaging
For B2B enterprises, the physical presentation of a product often serves as the first tangible touchpoint of brand quality. Investing in custom business bags allows companies to extend their brand identity beyond the digital screen, providing a professional vessel for corporate gifts, teaware, or luxury promotional items. This article explores the technical and aesthetic considerations required to move from generic packaging to a high-conversion brand asset. The challenge for most procurement managers is balancing structural durability with high-end visual appeal. Whether it is a heavy tea set or delicate cultural crafts, the packaging must resist slumping and handle weight without tearing.
Read More

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.