Custom Slide Sleeve Magnetic Flip Cosmetic Box
Custom Slide Sleeve Magnetic Flip Cosmetic Box
Custom Slide Sleeve Magnetic Flip Cosmetic Box
Custom Slide Sleeve Magnetic Flip Cosmetic Box

Custom Slide Sleeve Magnetic Flip Cosmetic Box

The box is two boxes in one, a printed sleeve outside and a magnetic box inside. The sleeve comes off first, and then the lid is lifted on its hinge. The top layer is a shallow tray, and a card or a booklet sits in it. The lower layer has a moulded tray, and each bottle has its own slot. The magnet holds the lid down, and the lid does not fall open in a bag. The art paper is printed soft, and it takes a matte or a gloss film. Gold foil and a raised stamp both sit on the face as the print does. Beauty salons, perfume counters and lipstick sets each get their own tray. The tray is moulded to your bottles, and the box type can be a flip, a drawer or a lid and base. Our factory cuts the board, moulds the tray and sets the magnet, and each box is closed once before packing.

Pull the Sleeve and Lift the Magnetic Lid

The box is two boxes in one: an outer sleeve printed on all four sides, and an inner box with a magnetic lid. The sleeve is a closed tube, and the inner box slides out of it. The sleeve is printed on the front, the back and the two sides, so the box reads from any side. The inner box comes out, and then the lid is lifted on its hinge. The hinge is a strip of the same art paper, and it folds with the lid. The sleeve goes back on the box after the gift is taken out, and the two line up again. With the sleeve on, the box is a plain block with no lid edge, and with the sleeve off the magnetic box shows. The sleeve is a little looser than the inner box, and it slides off with one hand. There are two layers of board, one inside the other, and the box is held from both sides.


The Top Takes Cards and the Base Takes Bottles 

- For a beauty salon: a treatment card and four ampoules, with the card on the top tray.
- For a perfume set: a bottle in the lower slot and a card above it.
- For a lipstick set: four lipsticks in four round slots and a booklet on the top tray.
- For a skincare set: a serum, a cream and a mask, each in its own cut.
- For a member gift: a small bottle below and a card in the shallow tray.
- For a new line: samples in the lower layer and a leaflet in the top tray.


The Magnet Holds the Lid and It Stays Shut

Two magnets sit under the paper, one in the lid and one in the front wall. The magnets are set into the board before the paper goes on, so nothing shows on the face. The lid comes down, the magnets take it, and the lid closes without a sound. The pull is light at the corner, and a thumb lifts the lid. The lid stays shut when the box is carried in a bag, and it does not fall open on its own. The magnet is a small disc, and its place is marked on the board with a die. The two magnets sit at the same depth, so the lid closes flat. A box opened and closed at the counter many times keeps the same pull.


The Tray Is Moulded With a Slot for Each Bottle 

The tray is a sheet of board moulded to the shape of what goes in. A lipstick gets a round slot, a bottle gets a square one, and a compact gets a shallow bed. The slot is a little wider than the product, so the product goes in and comes out with two fingers. The tray is cut on a die, and the depth of each slot is set by the height of the product. The tray sits on a rim inside the box, and it does not move when the box is turned. A product in its slot does not slide, so the print on the bottle is not rubbed. The tray can be one piece or two layers, with a top tray that lifts out. A paper tab is put under the top tray, so the tray lifts with one pull. When a product changes size, the tray die is changed, and the box stays the same.


Print Foil and Emboss and the Box Type Change

- Print: four colour print on art paper, with a matte or a gloss film over it.
- Gold foil: a name or a thin line in gold, pressed at a set heat.
- Emboss: a raised mark or a pattern, pressed into the paper after the print.
- Flip lid: the magnetic box in this picture, with the sleeve outside.
- Drawer or lid and base: the same print on a drawer box or a two piece box.
- Stock box types: flip, drawer and lid and base boxes are in stock, and we send pictures and videos on request.


Beauty Salon and Perfume Orders Are Made Here 

Our factory has run beauty boxes for salons, perfume houses and lipstick lines. A salon set usually comes as one box with a tray for four or five items. A perfume house usually takes a sleeve box, with the print carried round all four sides. A lipstick line usually takes a shallow tray with four to six round slots. The board, the paper and the tray are cut in the same place, and the magnet is set on the same line. A new tray is drawn from the size of your bottle, and the first box is opened and closed before the run. Every box is closed once before it is packed, and the magnet is felt at the corner.



blue mailer box

Request Pricing & Samples

Start Your Packaging Project Today


Hot-selling products

Explore our most popular packaging and printing products, trusted by customers worldwide for their quality, durability, and outstanding presentation.

Our Latest Blog

Stay informed with the latest packaging innovations, printing technologies, and news from MOYEE Packaging.

Premium Custom Party Bags for High End Event Packaging
Premium Custom Party Bags for High End Event Packaging
Specialized packaging for celebratory events serves as more than just a container; it is an extension of the events theme and a tangible memory for guests. When businesses seek custom party bags, they are looking for a balance between aesthetic appeal, structural durability, and brand alignment. This guide explores the technical and artistic considerations involved in creating premium paper carriers that elevate the guest experience. In the competitive B2B packaging landscape, the difference between a generic carrier and a high-end gift tote lies in the details of executionfrom the tactile feel of the ink to the precision of the fold.
Read More
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print: A Practical Fit Check
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print: A Practical Fit Check
Luxury Textured Paper Tote Bag with Glued Ribbon Handle Custom Print fits presentation-led packaging for couture, boutique, jewelry, and salon settings. Its tactile embossed paper, coordinated ribbon handle, low-saturation color, and gold or silver stamping support a controlled brand presentation. Choose it by measuring the product inside first, then settle the grain, color, handle, logo placement, and stamping treatment.
Read More
Premium Custom Business Bags for High End Brand Packaging
Premium Custom Business Bags for High End Brand Packaging
For B2B enterprises, the physical presentation of a product often serves as the first tangible touchpoint of brand quality. Investing in custom business bags allows companies to extend their brand identity beyond the digital screen, providing a professional vessel for corporate gifts, teaware, or luxury promotional items. This article explores the technical and aesthetic considerations required to move from generic packaging to a high-conversion brand asset. The challenge for most procurement managers is balancing structural durability with high-end visual appeal. Whether it is a heavy tea set or delicate cultural crafts, the packaging must resist slumping and handle weight without tearing.
Read More

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.